Why does plasterboard have a tapered edge

They are excellent for semi-exposed areas, such as soffits and the like. Most common plasterboards come with the option of either tapered edge or square edge. Tapered edge boards are ideal for either jointing or skimming, while square edge is generally used for textured finishes. Plasterboard generally comes in mm wide sheets, designed to suit the standard mm stud spacing used in housing today. Other widths are available for specific systems. Most standard plasterboard has one ivory face and one brown.

The liner on the ivory face is specially designed for plastering plaster should not be applied to the brown reverse face. Taper edge is primarily for tape and fill. Also a pain when cutting. Ideal in a bumped up standard 2. I can see reasons for both. Anyone else got any thoughts? Go with Noseall, 16, posts verses 43 posts The taper is on the decorating side. Square edge for plastering buddy, Tapered is for dry lining as matey says. Nige F , 29 Oct Wow, fair amount of chat here.

Cheers all. The grey side should face out if you want to skim plaster over the wall afterwards. If you going to wallpaper,artex or paint the board without applying a layer of plaster you should have white side facing outward.

Many new homes these days are not plastered internally. The stud partition walls, and often the inner faces of the outside walls too, are lined with plasterboard , but this is not skimmed with plaster. The paper surface of the plasterboard is the only finish, and paint or wallpaper is applied directly to it. Foil Backed Plasterboard utilises a thin foil backing to provide excellent vapour resistance.

The foil acts as a powerful barrier that limits moisture diffusion and prevents creeping damp. This makes it ideal for use in. Browse our range of foil backed plasterboards to find a product that's perfect for you. Hi, Years ago the plasterboard used to be laid grey side facing for plastering and the ivory side facing for dry lining or artexing. A reaction that produces hydrogen sulphide, a strong smelling, toxic gas and a constituent of acid rain can occur.

Tape doesn't shrink and helps reinforce the joint. Why does plasterboard have a tapered edge? Category: hobbies and interests woodworking. Plasterboard is good for cutting down noise transmission particularly airborne sounds such as speech and music. Should drywall joints be tight? Drywall Joints Are Too Tight.

What's the difference between tapered edge and square edge plasterboard? Tapered edge plasterboard is most commonly used for walls and features a narrower edge profile, making it better suited for either jointing or skimming. Plasterboard with a tapered edge makes it easier to achieve a seamless finish between sheets, providing a sturdy, even base upon which to plaster.

Our range of tapered edge plasterboard is easy to cut to size, and is available in a selection of features to ensure you have the right tapered edge plasterboard for your project. See more Plastering supplies. Gyproc Standard Tapered edge Plasterboard, L 2. Gyproc Thermaline Tapered edge Plasterboard, L 2. Gyproc Standard Tapered edge Plasterboard, L 1.

Showing 7 of 7 products.